MyTek MWA-105 Manual de usuario descargar pdf (Pagina 14)

MyTek MWA-105 Access Point

Communication Ltd.

Version: 1.1

mouse and double-click the Local Area Connection icon. The Local Area Connection window

will appear. Click Properties button in the Local Area Connection window.

3. Check the installed list of Network Components. If TCP/IP is not installed, click the Add button to

install it; otherwise go to step 6.

4. Select Protocol in the Network Component Type dialog box and click Add button.

5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install

the TCP/IP protocol, it may need the Microsoft Windows CD to complete the installation. Close

and go back to Network dialog box after the TCP/IP installation.

6. Select TCP/IP and click the properties button on the Network dialog box.

7. Select Specify an IP address and type in values as following example.

! IP Address: 192.168.1.1, any IP address within 192.168.1.1 to 192.168.1.253 is good to

connect the Wireless LAN Access Point.

! IP Subnet Mask: 255.255.255.0

8. Click OK to completes the IP parameters setting.

For OS of Microsoft Windows NT:

1. Click the Start button and select Settings, then click Control Panel. The Control Panel window

will appear.

2. Move mouse and double-click the right button on Network icon. The Network window will appear.

Click Protocol tab from the Network window.

3. Check the installed list of Network Protocol window. If TCP/IP is not installed, click the Add

button to install it; otherwise go to step 6.

4. Select Protocol in the Network Component Type dialog box and click Add button.

5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install

the TCP/IP protocol, it may need the Microsoft Windows CD to complete the installation. Close

and go back to Network dialog box after the TCP/IP installation.

6. Select TCP/IP and click the properties button on the Network dialog box.

7. Select Specify an IP address and type in values as following example.

! IP Address: 192.168.1.1, any IP address within 192.168.1.1 to 192.168.1.253 is good to

connect the Wireless LAN Access Point.

! IP Subnet Mask: 255.255.255.0

8. Click OK to complete the IP parameters setting.

3.2 Connect to the WLAN Access Point

Open a WEB browser, i.e. Microsoft Internet Explore, then enter 192.168.1.254 on the URL to

connect the WLAN Access Point.

MyTek Communication Ltd. Tel: (36-1) 347-0446, (36-1) 280-9397

Vörösmarty utca 79. Budapest Fax: (36-1) 347-0447

Hungary H-1201 http://www.mytek.eu

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 53 54

Sin comentarios

MyTek MWA-105 Manual de usuario Pagina 14